Top Home Bottom

Part 132: Flywheel

132	Flywheel, 2¾'' diameter	1921	1941	1	1

The parts

The Flywheel is mentioned in the March 1921 edition of the Meccano Magazine, as a suggestion from a reader, and the reply states that "we propose introducing one at the earliest opportunity".  Sure enough, it appears in the September 1921 issue, along with many other new parts.  It was included in the new outfit 7 in 1922, and continued into outfit L and (many people forget) was also included in the pre-war outfit 10.  It was never reintroduced after the war.

Cast in lead with a long brass boss incorporating a small pulley section, the flywheel does its job surprisingly well for such a small part.  The weight, at around 140g (5 ounces), is mostly concentrated around the rim.  The rim itself has a central groove with indentations to help grip a cord, presumably.

The comments below mention that the flywheel is much too hard to be made from pure lead, and the blueprints confirm this. Now that we have them, we can see that the wheel is specified as 86.75% lead, 13% antimony, and 0.25% tin. This makes for an extremely hard lead alloy.

Although it was shown as being in the (non-existent) outfit 10 immediately post-war, it had disappeared from the outfit contents listings by 1949 when outfit 10 was reintroduced. Along with many other pre-war parts, it still appeared in the illustrated parts lists until 1952, but it is not thought that this part was manufactured post-war.

Chronological variations

The most significant changes in the flywheel, apart from the change to double tapping presumably somewhere around 1928/29, is the colour.  The parts were originally painted black, then were blue for a short time, then red.  DMS/EMP shows these changes as being both within the 1934-1935 period of lettered outfits, but it was almost certainly matching the other blue parts during 1932-33, then changed to red in 1934 with the start of the lettered outfits, along with most other parts.

DMS/EMP doesn't mention single and double tapping, although it shows in the diagrams along with a supposed change in the thickness of the rim from 17/32" (13.5mm) to 31/64" (12.3mm), which seem to be arbitrarily assigned fractional measurements.  I don't believe that this rim thickness change is valid – examined parts have a range of rim thicknesses consistent with a cast lead part being milled to produce a smooth even rim.  The thickness of most parts is between 12.4 and 13.4mm. 

The scatter graph to the right shows the parts examined to date, and so far looks to be almost completely random.  This shows clearly that there aren't two distinct widths of the flywheel, nor is there any significant relationship between dates/styles of flywheel and widths or weights. The only thing we can see is a slight correlation between width and weight, as you might imagine.

The blueprint to the right shows the wheel and the central special boss for the Flywheel. Originally drawn on 14th July 1921, this part went through the following changes:

1/9/44:	Redrawn, Meccano England stamping added
3/5/49:	Length of boss changed

The obvious oddity here is the mention of the boss changing in length. The diagram of the wheel shows the central boss section of the wheel doubling in size from 3/16'' to 3/8''. However, this change is dated May 1949. The newly introduced Outfit 10 immediately after this date no longer contains the flywheel, and it is not thought that the flywheel was subsequently available. So this seems to be a drawing of a part that doesn't exist. Certainly I've never seen a flywheel with a thicker boss section as shown on this drawing, have you?

The original blueprints for this part can be seen by clicking here.  

Variations and oddities

The other change that I can see is that I have just one example of the flywheel with a boss where the serrations in the boss are visible (left-hand example in this picture).  All others have a very slight peened-over end holding the flywheel in the boss.  Sadly, the serrated example I have is repainted, but the picture shows the difference.  Is this an example with the peened part broken off, or are there more like this? Until we find more, this is not shown as a separate version in the table below.

Dealer spare parts boxes

Amazingly enough, we do have a picture of a box of three of these parts.  The picture was kindly sent by Greg Rahn, and is held by Jim Bobyn (but we won't reveal which fellow UK collector was being badgered to sell it at the time!)

Individual part numbers

Part numbers for the parts on this page are as follows:    Unique part numbers
For identification, each variation has been given a suffix to the main Meccano part number. These suffixes consist of a two-character code for the colour, and if there are many variations, a further number and sometimes letter code to identify each variation. See the bottom of the 'Parts' page for further details.

You don't need to worry what the codes are, just click on any one for a photograph.

The button above turns on and off the display of DMS numbers (where they are known). The DMS (Development of the Meccano System, Hauton and Hindemarsh) published in 1972 and added to in 75 and 82, suggested part numbers for every variation of every Meccano part. These numbers aren't perfect, but they are recognised and also referenced in the EMP (Encyclopedia of Meccano Parts, Don Blakeborough).

Description	from	132
Cast lead flywheel, painted black, single-tapped brass boss	21	.bk
Cast lead flywheel, painted black, double-tapped brass boss	28?	.bk1
Cast lead flywheel, painted blue, double-tapped brass boss	32	.nb
Cast lead flywheel, painted red, double-tapped brass boss	34	.mr
		ALL

Please send us pictures of missing parts! Hints and tips for pictures
Take a picture of the part in very good light, preferably on a plain yellow background, without a flash but with a tripod.
Ideally, trim the picture to about 150 pixels per inch of the Meccano part (unless the part is particularly big or small), save it as a reasonably good quality jpg file with a filename of exactly the part number, for example 19b.ni1.jpg, and email it to us by clicking on 'Contact us' at the top of the page. Thanks!

• A greyed-out box shows that no part exists for that colour combination.
• Part number codes with a green background have an attached picture of the part, just click once on the code to show a photograph of that part in a separate window.
• Parts marked "†" were temporary or economy parts, or existed only within specific themed outfits. The previous part continued throughout or afterwards.

Further information

Total number of messages on this page: 8.  This is page 2 of 2.   

Thomas Lawry      (at 7:51pm, Tue 9th Feb, 10)

Do the Transvaal Meccano Guild of Johannesburg, South Africa, replica flywheels (Ref;MM July 1976) count as suitable for inclusion in "Variations & Oddities" as per the WRI Channel segments for p/n.119? Are they easily distinguished from Binns Rd production, or are they faithful facsimiles? p.s. Al Barton has speculated that the awareness of lead poisoning may have contributed to the withdrawal of this item. It's a pity that a brass version wasn't introduced instead.

Bengt Johansson      (at 11:26am, Tue 9th Feb, 10)

I have a red flywheel with 12.2mm's rim thicknes

Your name:
Your message:
Security check:	(Please type in the text to prove you're a person!)