Printed from www.nzmeccano.com
Part 141: Wire line (for clock)
| 141 | Wire line (for clock) | 1924 | 1941 | 1 | 1 | n/a | ||
The parts
We saw in the last part (Universal Coupling) that although the April 1924 edition of the Meccano Magazine stated that part 140 was the latest addition to the Meccano system, there is also a mention on that same page of part 141, the Wire Line (for clock).
It is, of course, only used in the Grandfather Clock supermodel, described in the November and December 1923 issues. The description calls for "10 feet of flexible steel wire", but the part was made available in time for the supermodel leaflet which was advertised as being available in the June 1924 issue. Part 141 is approximately 12 feet long.
More interestingly, the 18lb weight also required for the clock was drawn up as a part in July 1923, but never issued. It consisted of a 4x4x3" block of lead with a steel hook embedded in the top. The addition of this part would have made an outfit 7 impossible to carry, no doubt!
The Wire Line was added to outfit 7 in 1928, and survived through the L outfit, but was never included in the outfit 10. It last appeared in parts lists in 1941, but didn't reappear in the first lists of 1945. Despite a half-hearted attempt to suggest that the wire line could be taken apart and used as a cable for a heavy-duty crane in the July 1930 Meccano Magazine, it remained a part with only one documented use.
Chronological variations
Variations to this part aren't known at the time of writing. Current examples known to be genuine all appear to be identical, with a twisted loop at one end and a standard wire Hook (part 57) at the other.
Variations and oddities
None known. We need to be careful of reproduction parts here, as the wire line is a very expensive and rare part, very easily reproduced by twisting some off-the-shelf stranded wire around a Meccano hook.
Dealer spare parts boxes
None known
Individual part numbers
Part numbers for the parts on this page are as follows: Unique part numbersFor identification, each variation has been given a suffix to the main Meccano part number. These suffixes consist of a two-character code for the colour, and if there are many variations, a further number and sometimes letter code to identify each variation. See the bottom of the 'Parts' page for further details.
You don't need to worry what the codes are, just click on any one for a photograph.
The button above turns on and off the display of DMS numbers (where they are known). The DMS (Development of the Meccano System, Hauton and Hindemarsh) published in 1972 and added to in 75 and 82, suggested part numbers for every variation of every Meccano part. These numbers aren't perfect, but they are recognised and also referenced in the EMP (Encyclopedia of Meccano Parts, Don Blakeborough).
| Description | from | 141 |
|---|---|---|
| Wire line, 12 feet of stranded cable with hook attached | 24 | .xx |
| ALL |
, Wire line, 12 feet of stranded cable with hook attached.',700,556,'white')){kind=link}
Please send us pictures of missing parts! Hints and tips for pictures
Take a picture of the part in very good light, preferably on a plain yellow background, without a flash but with a tripod.
Ideally, trim the picture to about 150 pixels per inch of the Meccano part (unless the part is particularly big or small), save it as a reasonably good quality jpg file with a filename of exactly the part number, for example 19b.ni1.jpg, and email it to us by clicking on 'Contact us' at the top of the page. Thanks!
- A greyed-out box shows that no part exists for that colour combination.
- Part number codes with a green background have an attached picture of the part, just click once on the code to show a photograph of that part in a separate window.
- Parts marked "†" were temporary or economy parts, or existed only within specific themed outfits. The previous part continued throughout or afterwards.
Further information
Anonymous (at 12:29am, Sat 10th Jul, 21) |
ÎïÒµ6Ôª£¬300ƽ·½£¬2Ôª.µç»°18616850982 |
Richard Payn (at 4:53am, Thu 2nd Oct, 14) |
I have a feeling a picture of the box will appear on here soon! |
Jenksman (at 5:15am, Wed 1st Oct, 14) |
One of these parts complete with yellow dealers box was sold on EBay a few days ago. |
iosilverroy (at 2:54pm, Thu 31st Oct, 13) |
thanks for the info. just what I was looking for. many regards Roy. |
Paul D (at 3:22am, Sun 9th Dec, 12) |
From Aeso, in the forum |
kbisset (at 3:12pm, Sat 8th Dec, 12) |
Could someone provide the outside diameter of this wire, and other details of construction? I found some stranded steel wire which worked very well for my Grandfather Clock, but would like to know how close it is to the correct size. |